TGCL
- Radial centrifugal pump.
- End suction type.
- Sizes from DN65 to DN150.
- Manufactured in cast iron EN-GJL-250 or EN-GJS-400.
- IP67 protection.
- Developed, produced, and tested according to the specifications established by standard EN IEC 60076-22-5.
Low Temperature (LT) Version:
- Supports ambient temperatures down to -60ºC.
- Approved to start with fluid down to -45ºC, and the kinematic viscosity must be less than 7200 mm2/s (COLD START).
APPLICATIONS
- Power transformers with radiator cooling system
INSTALLATION
- Can be installed horizontal or vertically
- Installation versatility
FLANGE OPTIONS
- Flanges available according DIN standard
- PN10 rated pressure
- Raised face or flat
ENGINE OPTIONS
- Possibility of 4 or 6 pole motors
CONSTRUCTION MATERIALS
- Cast iron casing and impeller EN-GJL-250 or EN-GJS-400
- Viton seals and fixing accessories in AISI 316
- Terminal Boxes with IP56
WORKING LIMITS(50 Hz)
- Maximum flow rate (per pump): Up to 260 m³/h
- Head: Up to 15 m
- Fluid temperature: -25ºC up to +115ºC ( LT version up to -45ºC)
